Rain Bird – R-VAN14-360 – 8′-14′ Full Circle Rotary Nozzle (360 Degree)

Features / Benefits

• Fewer zones, faster installs – System complexity and cost are reduced because more heads can be installed per zone. Rotary Nozzles can also be zoned with Rain Bird 5000/5000 Plus MPR Rotor Nozzles.
• Efficient water distribution – multiple rotating streams deliver close-in watering and even coverage throughout the radius range. The low precipitation rate significantly reduces wasteful run-off and erosion
• Ultimate retrofit solution – low flow rate and an expanded radius of throw solve existing spray zone inefficiencies caused by diminished pressure or stretched spacing.
• Low precipitation rate – 0.60 in/hr (15,2 mm/hr) – reduces run-off and erosion.
• Flow Rate – 1.10 – 1.45 GPM
• Multiple, rotating streams uniformly distribute water throughout the radius range.
• Matched precipitation rate across radii and pattern simplify the design process.
• With approximately 60% less flow than conventional spray nozzles, Rotary Nozzles allow more heads per zone, reducing overall system complexity and cost.
• Female Thread Rotary Nozzle

Specs

• Pressure range: 20 – 55 psi
• Recommended Operating Pressure: 45 psi (3.1 bar)
• Spacing: 8 to 14 (based on zero wind conditions)
• The Rotary Nozzle shall have multiple arced streams and have a matched precipitation rate of 0.60 in/hr.
• The Rotary Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screw shall be of stainless steel.
• Adjustments: Arc and radius should be adjusted while water is running

Manuals and Literature

• Nozzle Performance Data
• R-Van Sell Sheet