Key Fire Hose Magnum Nylon Double Jacket Fire Hose

*Polyurethane liner not available

• Double jacket construction is tightly woven from entangled filament Nylon 6.6 yarn in both the inside and outside jackets for increased abrasion resistance. The filler yarns of both the inner and outer jackets are high tenacity filament polyester for increased tensile strength and durability. Double jackets encapsulate a rubber lining consisting of a single-ply extruded tube of synthetic high tensile EPDM compounded (Magnum) or synthetic polyurethane (Maglite) that is ozone resistant.

• Magnum and Maglite are treated with a special “Key-Lok” polyurethane-based polymer impregnation for enhanced color and added abrasion resistance.

• Magnum and Maglite can be coupled with 6061-T6 aluminum threaded couplings or forged Storz. Special threads or other custom features are available upon request. Barcode recess is available at an additional charge.

• The minimum burst test pressure when tested in accordance to NFPA 1961 on all Magnum diameters up to 3″ shall be 1200 psi / 82 bar. Minimum burst test requirements for 4″ and 5″ diameters shall be 900 psi / 62 bar. Service test pressures stenciled on the hose shall be in accordance with the current minimum requirements of NFPA 1962.

• Magnum and Maglite hose meet and exceed all performance requirements of NFPA 1961 and MIL‑H‑24606 latest edition standards.