The controller has two methods of operation. Both options can run simultaneously on the same controller.
The first option allows for choosing three programs A, B, C. Each program can be set either according to days of the week or to a cycle. It can easily operate up to 24 valves.
The second option is the ability to program the controller to operate up to 24 valves, each with an independent program. The controller also incorporates fertigation and lighting functionalities.
- Controls the operation of 1 to 24 valves
- Modules install in easy to reach central compartment
- Master valve / Pump Start / Lighting and Fertiliser terminals
- Sensor input – prevents activation of stations (user can choose)
- Station run times from 1 minute up to 9 hours
- Programs – A,B and C (maximum of 1 program on at any time)
- Lighting program – switches 24vac up to 40mA
- Lighting program will not effect MV, Sensor, Fertigation or Water Budget
- Independent programming of each station when required
- Weekly or cyclic irrigation programming
- Rain Off – from 1 to 99 days
- Independent weekly or cyclic irrigation programming for individual valves
- Maximum number of 2 independent programmed stations on at any time
- Fertiliser programming for individual valves
- Fertiliser is added according to watering duration from 10% to 90%
- Water budget – Selectable between 90% to + 90%
- Irrigation cycle from once daily to once every 30 days
- Computerised manual operation of individual valves or valve groups
- Circuit breaker identifies and overrides a short in a valve, with visual warning
- Memory backup of program for 20 years (batteries not required)
- Clock backup with 9V battery (not included)
- Testing – Allows short circuit detection on faulty solenoids from control panel
- Clock battery warning – low power will appear on display panel
- Warranty period 36 months
Reviews
There are no reviews yet.